How To Set Up A Cage For A Bunny

Download Article

Download Commodity

At that place are many different ways you lot can build your own rabbit cage, ranging from uncomplicated and cheap to complicated and expensive. If you're building your first ever rabbit cage, your best bet is a uncomplicated screened box with an open bottom for yous to access the rabbits from. This cage design is like shooting fish in a barrel to build using common paw tools and a few materials you can purchase from your local hardware store. Yous tin apply this cage inside your home or outdoors. If you choose to use information technology within, you may want to lay a tarp beneath information technology to keep rabbit droppings from sticking to your floor.

Also, the all-time way to house a rabbit is to put the rabbit in a big doggy pen with enough of free time, or, even better, free roaming. But please understand that to free roam rabbits, you have to make sure that your house is bunny-proof. Encompass upwardly wires, because if they're chewed, it tin crusade your rabbit to be electrocuted. But don't let that scare you from letting your bunny run around. It's very important for them to get out time. Also, never permit your rabbit live exterior. The rabbit is exposed to predators, and tin can get all kinds of sicknesses.

1. 1

   Measure and cut the wood. The basic shape of the rabbit cage is made up of 2 wooden frames continued by iv posts. Purchase 2 in (5.i cm) by 4 in (x cm) lumber from your local hardware store and use a forest saw to cutting them to the appropriate lengths. Once completed, the cage will measure 6 feet (1.8 m) long by 3 feet (0.91 thousand) broad and 2 feet (0.61 m) tall, which is enough for 2 or iii medium sized rabbits.

   • Y'all volition need four pieces that measure 3 anxiety (0.91 m) in length, four that mensurate 2 anxiety (0.61 one thousand), and 4 that measure 6 anxiety (1.8 m).
   • You will as well demand i piece of plywood that measures 3 feet (0.91 m) by 2 feet (0.61 m). You tin either cut that yourself or buy a piece of that size from your local hardware store.
   • Always wearable eye protection when sawing wood.

2. ii

   Use screws to connect a 3 ft (0.91 m) slice to a 6 ft (1.eight m) piece. Lay one of the half-dozen ft (one.viii m) pieces of wood on the basis on its side. Then position a 3 ft (0.91 m) slice perpendicular to it on ane side, so the two pieces create the shape of an L. Use screws and a power drill or electrical screwdriver to bind the two pieces together in this position.^[1]

   • Use screws that are at least 3 inches (7.6 cm) long to ensure they penetrate through both pieces of wood.
   • Y'all can purchase wood screws at your local hardware store.

   Advertisement

3. iii

   Spiral another three ft (0.91 m) piece to the other terminate of the wood. Position another 3 ft (0.91 g) piece of wood at a perpendicular angle to the 6 ft (1.viii thousand) slice you already used, but this time on the opposite side so the iii pieces of wood grade a U shape. Then secure the third piece in identify with screws.

   • Brand certain you position the 3 ft (0.91 m) pieces of woods on both sides of the 6 ft (1.viii m) piece in the same style so they match.

4. 4

   Attach another long piece to the short ones, creating a rectangle. Grab a second 6 ft (1.eight m) piece of wood and lay it on its side across the two extended 3 ft (0.91 m) pieces. With all iv pieces laying on the ground, the woods should at present take the shape of a rectangle.^[2]

   • Utilise screws to attach the second six ft (1.8 m) piece of wood to the others to create the rectangle shape.
   • Insert two screws into each corner to ensure the frame is strong and stable.

5. 5

   Repeat that process to create another wooden rectangle. Follow the same steps above when building a second frame that matches the kickoff 1. These ii frames will serve every bit the top and bottom of the rabbit muzzle.^[iii]

   • Repeat the steps exactly to ensure both frames are a perfect match for ane another.
   • Once finished, you will have ii matching wooden rectangular frames.

Advertisement

1. 1

   Lay one rectangle flat on the ground. This frame will serve every bit the bottom of the cage. Make sure you lay it down in an expanse where you have sufficient room to work, simply information technology doesn't have to be where the cage will remain permanently.^[four]

   • In one case finished, the frame will be small enough to move with a friend.
   • If you are building the cage indoors, brand sure there's plenty room around the frame for you to easily move around to each of its four corners as y'all work.

2. 2

   Screw the remaining 2 ft (0.61 thousand) pieces of wood upright into all four corners of the rectangle. The 2 ft (0.61 m) pieces of wood are posts that will concord upward the second frame equally the top of the cage. Place the 2 ft (0.61 m) piece upright inside the 4 corners of the frame that's on the ground, then use two 3 in (7.6 cm) wood screws on each post to secure them to the frame.^[v]

   • Align the posts then that they are standing perfectly upright earlier screwing them into place.
   • Mount all iv posts to the bottom frame before moving on to the adjacent step.

3. 3

   Lower the other wooden frame onto the upright pieces of wood. Ask a friend to help you lift the second wooden frame upwards and so you tin slide it over the upright posts attached to the bottom frame. Position the upper frame then the posts are inside all iv corners and lower the frame until the posts and the top of the frame are affluent or even.^[half-dozen]

   • Once you take the frame positioned, you and your friend will have to agree it in identify until information technology is secured.

4. four

   Have a friend spiral the 2d frame into the meridian of the upright posts. Accept your friend insert a 3 in (7.6 cm) forest spiral through the upper frame and into each upright post to hold it in place. One time those first iv screws are in, you and your other friend can let become of the frame. So add an boosted iii in (7.6 cm) screw to each corner to ensure information technology'southward secure and stable.^[seven]

   • You lot may be able to utilize just ane screw per corner, but 2 will be sturdier.
   • With the screws in identify, the basic frame of the cage is complete.

5. 5

   Lay the plywood downwards onto the lower frame and secure it with screws. A rabbit cage should include an area that's elevated from the footing and offers the rabbits shelter. Lay a slice of plywood that measures 3 feet (0.91 g) by 2 feet (0.61 g) across the bottom frame on i side. Then utilize wood screws to secure information technology into place.^[8]

   • This step will create a pocket-sized portion of the cage with an elevated flooring.
   • The rest of the cage floor will be open to the ground.

6. six

   Place a rabbit shelter on the plywood. You lot can purchase pre-made rabbit shelters from your local pet shop, but there are a number of inexpensive alternatives. Whatever overturned plastic container with a pigsty cut for a door can serve as a rabbit shelter for inside your cage.^[9]

   • The shelter will give the rabbits a identify to hide from pelting or intense sunlight.
   • It is easier to put the shelter in place before enclosing the cage, only you'll however exist able to access information technology from the bottom when the cage is consummate.

Advertisement

1. 1

   Unroll your screen over the top of the box. Just about whatsoever metal screen or wire craven fence will do for the sides of your enclosure. Buy a roll of your pick in screen material from your local hardware store and then unroll it across the meridian of your rabbit cage to encompass the unabridged opening.^[10]

   • Choose a screen or mesh material with openings that are smaller than a rabbit will be.
   • Yous volition demand at least 24 feet (7.3 chiliad) of screen material, but y'all'll want to purchase a bit more than that to ensure yous have slack to work with.

2. 2

   Employ a staple gun to secure the screen to the top of the box. Lay staples across the wire of the screen and into the wooden frame. Secure the screen to the unabridged top of the cage past placing a staple every four inches (10 cm) or so, while keeping the screen taught across the height.^[xi]

   • Be sure to keep the screen pulled tight over the frame as you stable it in place to avoid creating whatsoever loose portions a rabbit could escape through.
   • You can purchase a staple gun and staples at your local hardware store.

3. 3

   Snip away whatever excess screen textile with shears. Employ wire cutters or metal shears to cut the screen that hangs over the sides of the frame abroad. Cutting the screen and so no metal extends beyond the wood; otherwise, information technology may snag your clothes or scratch you every bit you walk by the cage.^[12]

   • You can likewise use pliers to fold any $.25 of metal extending out from the frame dorsum onto itself so no abrupt points are sticking out.
   • Cut the screen you secured to the superlative away from the whorl so you can employ the roll to encompass the rest of the muzzle every bit well.

4. four

   Wrap screen around the sides of the box and secure it with staples. The easiest manner to secure the screen to the sides of the muzzle is to lay the muzzle frame on its side and scroll the screen out over it merely as you did with the top. Staple the screen in place, using one staple every 4 inches (ten cm) or so, then rotate the cage and do the same for the side by side side.^[thirteen]

   • Echo this procedure for all four sides until the cage at present has a screen secured over everything but the very bottom.

5. 5

   Cut away whatever excess material afterwards the screen is secured. Utilize your shears or wire cutters to remove all the excess screen fabric hanging off of the sides y'all covered. The cage will not be completely enclosed except for the bottom. This open up bottom is past pattern, so you lot tin lift the muzzle upwards to get to the rabbits rather than installing a door.^[xiv]

   • If you choose to screen in the bottom of the cage because you're worried virtually animals excavation their mode in or out of the muzzle, consider zippo tying the screen in place so you tin remove it and gain access to the interior of the cage when necessary.

6. 6

   Place your rabbits in their new home. With the cage flat on the ground or floor, lift upwards the opposite side from the rabbit shelter. Have a friend concord the cage up while you place your rabbits inside, then carefully lower the cage back down to enclose them in.^[15]

   • To clean the cage, have a friend lift up the terminate opposite from the rabbit shelter and remove the rabbit. Then you can plow the cage onto its side or even upside down for easy cleaning.
   • To give the rabbit food or h2o in the cage, lift up the same end to slide the bowl in.

Ad

Add New Question

• Question

  Can I apply a fleece coating as bedding for my rabbit?

  

  Yes, you can. Make sure it is clean and does not accept the smell of another rabbit on information technology.

• Question

  How do you know when a rabbit is happy?

  

  Rabbits are happy when they are well-cared for, and they volition prove it by having energy and hopping around.

• Question

  How often should I clean out my rabbit's cage?

  

  There is no hard-and-fast dominion. It depends on the size and breed of your rabbit, and the time of year. When the rabbit is shedding, more than frequent cleaning is necessary. Clean the cage whenever it is more than half soiled.

• Question

  Can I potty train my rabbit?

  

  Yes, y'all tin. Rabbits are very clean animals, and tend to defecate in a particular expanse in their cage. Many people opt to litterbox-railroad train their rabbits.

• Question

  Can rabbits climb ramps?

  

  EmpressTiger

  Community Answer

  Yes, they tin. A healthy rabbit should exist able to easily go up and downwards a ramp, as long as the slope it not too loftier.

• Question

  What does a rabbit consume?

  

  Hay or fresh grass - give them at least an corporeality roughly the size of their ain trunk each day. Don't give them grass that has had chemicals or oil from a lawn mower on it. They also consume food in pellet form you can get at whatsoever pet shop. Y'all can also give them dark-green, leafy vegetables and fruits equally an occasional treat.

• Question

  Can a rabbit be left lonely for a weekend?

  

  EmpressTiger

  Community Reply

  With no care, no. It will become dehydrated and solitary, and could easily run out of food.

• Question

  Tin can I leave my rabbit outside with food and water for a calendar month, or would that be too stressful for information technology?

  

  Your rabbit should NOT be left solitary for such a long period of fourth dimension. If it is acclimated to the outdoors, information technology can stay exterior, merely MUST be checked at least daily for whatever problems that might occur. They tin can suffer from problems-bites, some of them very nasty. They can also become either too hot or likewise cold. All rabbits, within or outside, should be checked twice daily for any health/comfort bug.

• Question

  Should I give my rabbit a bath?

  

  No, your rabbit shouldn't demand to be bathed unless something happens that gets them extremely dirty. In the result that you practise need to bathe your rabbit, y'all can use wikiHow for some help. For instance, this article could exist useful: How to Breast-stroke Your Pet Rabbit.

• Question

  What do I do if my rabbit is non drinking?

  

  If yous are giving information technology fresh greens, so it won't need h2o, considering there is so much water content in the greens.

Run across more than answers

Inquire a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertizement

Thanks for submitting a tip for review!

Things You'll Need

• four pieces of 2 in (5.1 cm) by 4 in (10 cm) wood cut to 3 feet (0.91 m) in length
• 4 pieces of 2 in (5.1 cm) by 4 in (ten cm) wood cut to 2 feet (0.61 one thousand) in length
• 4 pieces of 2 in (5.1 cm) by 4 in (10 cm) forest cut to 6 anxiety (1.eight m) in length
• Plywood measuring 3 feet (0.91 grand) by two anxiety (0.61 1000)
• Power drill or spiral driver
• 3 in (7.half-dozen cm) forest screws
• Whorl of screen fabric at least 24 feet (7.3 chiliad) long
• Wire cutters or shears
• Staple gun and staples

Well-nigh This Article

Article Summary X

To build your own rabbit cage, build 2 wooden frames that are six feet long past 3 feet wide. These will be the pinnacle and bottom of the cage. Attach the frames with a 2-foot postal service at each corner. Screw a 3 ft past 2 ft slice of plywood onto one side of the lower frame to create a raised floor, then place a rabbit shelter on the plywood. Once the cage is fix, attach a screen to the peak and the sides of your enclosure. To put your rabbits in the muzzle, just lift upwards i side and slide them in. Read on to acquire how much screen you lot'll need for your cage!

Did this summary assist you?

Thanks to all authors for creating a folio that has been read 357,373 times.

Did this article help you?

Source: https://www.wikihow.com/Make-a-Rabbit-Cage

Share this post