How To Set Up A Scanner To My Computer

Download Article

This wikiHow teaches you how to connect a scanner to a reckoner wirelessly or with a USB cablevision. Luckily, this process is commonly every bit uncomplicated as plugging the scanner into your estimator, but if that isn't immediately working, at that place are steps you can take to manually add together your scanner.

1
Plug in your scanner to a power source and turn it on (if it'due south not already on). Yous need information technology powered on so your calculator tin can notice information technology.
- If your computer detects the scanner in one case they are both powered on, y'all demand to follow the on-screen prompts to download any necessary drivers and skip the balance of this method.
2

Click the Get-go Logo . You'll run across this in the lower left corner of your screen.

Advertizement
three

Click the settings icon . Yous'll encounter this gear icon on the left of your screen.
4

Click Devices . Y'all'll encounter this with an icon of a speaker and keyboard in the second cavalcade.
5

Click Printers & Scanners . You'll see this in the vertical carte on the left side of the window and a list of available scanners will populate.
6

Click Add together a printer or scanner . Y'all'll see this at the peak of the window.
7
Click your scanner's name and click Add device . In the list that populates, the scanner you want to add together will most likely display with the manufacturer proper name, the model proper noun, and/or the model number.
- Your estimator must be on the same Wi-Fi network as your scanner for it to detect it. If you're using Wi-Fi extenders for either device, connecting might not exist successful.^[one]
- Some scanners, especially scanners that apply Bluetooth to connect wirelessly, require you to put them in pairing or discovery mode first. You tin can practice this by pressing the Bluetooth button on the scanner. Refer to the manual that came with it for more than information.^[two]
Advertisement

1
Plug in your scanner and calculator. Using the USB cablevision that came with your scanner, plug it into an open USB port on your computer. If you don't have a USB cable that came with your scanner, ordinarily whatever USB cable will piece of work.
- If your reckoner detects the scanner once they are both powered on, you need to follow the on-screen prompts to download any necessary drivers and skip the rest of this method.
2

Plug in your scanner to a ability source and turn information technology on (if it's not already on). You demand information technology powered on and so your estimator tin can detect it.
iii

Click the Commencement logo . You'll see this in the lower left corner of your screen.
4

Click the settings icon . You'll see this gear icon on the left of your screen.
5

Click Devices . You'll see this with an icon of a speaker and keyboard in the second cavalcade.
half dozen

Click Printers & Scanners . Y'all'll see this in the vertical card on the left side of the window.
7

Click Add a printer or scanner . You'll see this at the top of the window.
8
Click your scanner'south name and click Add device . In the list that populates, the scanner you want to add together volition nigh likely display with the manufacturer name, the model name, and/or the model number.
- Follow any on-screen instructions if any pop-up. For case, if your Windows Security asks for permission to allow your scanner to install software and drivers, click Yep.^[3]
Advertisement

1

Plug in your scanner to a power source and plow it on (if information technology'south not already on). You need information technology powered on so your computer can detect it.
2

Click the Apple logo . Yous'll see this in the menu bar that runs horizontally across the top of your screen.
3

Click System Preferences . This is generally the second listing in the driblet-down menu.
four

Click Printers & Scanners . You'll see this next to an icon of a printer.
5

Click + (if you don't run across your scanner listed). You'll see this in the bottom left corner of the window. If, all the same, you lot meet your scanner listed, skip this stride.
6
Select your scanner. When you click your scanner, your Mac will begin the procedure of setting upwardly that device and so you can easily utilise it.^[4]
- If you're having issues, make certain your macOS is updated.
Advertisement

1

Plug in your scanner to a power source and plough it on (if information technology'south not already on). Y'all need it powered on so your computer tin detect it.
2
Plug in your scanner and computer. Using the USB cable that came with your scanner, plug it into an open USB port on your estimator. If you don't accept a USB cable that came with your scanner, normally any USB cable volition work.
- If your Mac only has one USB-C port and y'all have a USB connexion, you can use a multiport adapter.^[5]
3

Click the Apple logo . You'll run into this in the menu bar that runs horizontally across the pinnacle of your screen.
iv

Click System Preferences . This is generally the second listing in the drop-down menu.
5

Click Printers & Scanners . You'll run across this side by side to an icon of a printer.
6

Click + (if you don't encounter your scanner listed). Yous'll see this in the bottom left corner of the window. If, however, you see your scanner listed, skip this step.
7
Select your scanner. When y'all click your scanner, your Mac will begin the procedure of setting up that device so you tin can easily utilise it.^[half-dozen]
- If yous're having problems, brand sure your macOS is updated.
Advertisement

Ask a Question

200 characters left

Include your electronic mail address to get a message when this question is answered.

Submit

Advertising

If y'all're having issues connecting a wired scanner, make sure all the wires and connections are secure. A frayed wire or a loose plug could exist the consequence.^[7]
If you're connecting wirelessly and don't meet your scanner in the list of bachelor devices, make certain both are connected to the same network.
Bank check to run across if there is a driver update for your scanner, that could also exist the source of some of your bug.

Advertising

About This Article

Article Summary X

ane. Plug in your scanner to a ability source and turn information technology on (if it'due south non already on).
two. Click the First logo.
three. Click the settings icon.
four. Click Devices.
five. Click Printers & Scanners.
6. Click Add a printer or scanner.
seven. Click your scanner's proper noun and click Add device.

Did this summary help you?

Thanks to all authors for creating a page that has been read 40,265 times.

Is this article upward to date?